Throttle Valve Switch — Removal and Installation (Nissan Bluebird T12)

1. Mark the position of the switch in the throttle chamber.

2. Release the wiring harness retaining clip and disconnect the wiring from the switch.

3. Remove the two bolts (photo) and lift the throttle switch out of the throttle chamber.

Note: Each time the throttle switch bolts are loosened, it will need to be adjusted.

4. Installation is carried out in the reverse order, align the switch according to the marks made.

5. Set the switch position as described in Chapter 41.

The text was copied from the portal NISSANBOOK.ru