Table of contents: Front mudguards ↓ Rear mudguards ↓ Shields under the wing ↓ Engine compartment lower shields ↓
Front mudguards
1. The front mudguards are secured with three screws, threading the plastic union nuts.
Rear mudguards
2. The rear mudguards are secured with four screws, threading into plastic brackets or union nuts.
Shields under the wing
3. Each shield is secured with four hex head screws (the front one also holds the engine compartment shield) and two plastic staples (see photo).
14.3. Mudguard panel mounting points (three are shown)
4. All the above operations are easier to perform if you lift the car and remove the wheel.
Engine compartment lower shields
5. The engine bay lower shields are secured with bolts cut into the front body panel and the engine mount longitudinal beam, and with Allen screws into the inner wing panel. Note that the latter also secure the shield under the wing.
6. The left shield is secured with five bolts or screws, the right one with six.
[Information copied from the website: www.NISSANBOOK.ru]