Removal
Perform operations 1-13 p. "Removal" higher.
Installation
Installation is carried out in the reverse order of removal, taking into account the following:
- Perform final tightening of all bolts and nuts in the front suspension installation position (rubber-metal bushing) in an unloaded state, when the vehicle is standing with its wheels on the ground.
Check after removal
Check for significant deformation, cracks and damage on the front suspension beam. Replace if necessary.
Post-installation check
1. Check the front wheel alignment angles. See above.
2. Perform the neutral position adjustment of the steering angle sensor. See chapter "Brake system".