Table of contents: Electric windows ↓ The main switch for the window lift…↓ Passenger door window switch ↓
Electric windows
- The power windows can operate when the ignition key is in the ON position.
- To lower the window, press the power window switch.
- To raise the window, pull the power window switch up.
The main switch for the window lift drive is located on the driver's door.

This switch allows you to control the windows of all doors.
Blocking the electric windows of the passenger doors
To lock and unlock these windows, press button (A).
Passenger door window switch
- The passenger door window switch controls the passenger door window.
- If the passenger window lock button on the driver's door is pressed, the passenger window will not operate.

Automatic function

- Automatic operation is possible if there is a mark on the outer surface of the window lift switch
. - The automatic function allows you to fully raise or lower the glass without holding down the switch button.
- To lower the window completely, press the window switch button until it clicks a second time and release it. To raise the window completely, pull the window switch button up until it clicks a second time and release it. You do not need to hold the switch while operating the window.
- To stop the window lift from operating automatically, press the switch or pull it in the opposite direction.
Auto service function
- The automatic safety function allows the glass to be lowered automatically if something gets into the window opening when it is closing in automatic mode. If the control system detects an obstacle in the window opening during the glass's upward movement, the glass will immediately stop closing and begin to move downward.
- The automatic reverse function may be activated arbitrarily when an impact or a load similar to jamming occurs.