External and internal elements of the body Nissan Terrano 1 (WD21)
Body Specifications Tightening torques (N·m) Bumper bracket mounting bolts Before 1990 20 Since 1991 32-40 Bumper to bracket bolts Before 1990 20 Since 1991 11-15 Mounting bolts hood hinges...
Body maintenance and repair Maintenance and repair 1. The condition of your vehicle's bodywork is very important because it has a large impact on its resale value. It is much more difficult to...
Bumpers — removal and installation 1. Disconnect the battery from the ground. 2. Disconnect the wires leading to the bumper. 3. On a forward bumper turn away bolts of fastening of lateral sections to...
Front grill — removal and installation 1. Open the hood. 2. Using a screwdriver, turn the latches that secure the grille at the top and slide the grille up. Remove the grate by lifting straight up from the...
Front apron — removal and installation 1. Remove the bumper and grille. 2. Turn away bolts and remove an apron. 3. Installation is carried out in the reverse order.
Front fender — removal and installation 1. Disconnect the battery from the ground. 2. Remove the front bumper. 3. Turn away screws of fastening of the protective panel of a niche of a wheel and remove the...
Hood adjustment 1. Proper adjustment of the hood is necessary in order to prevent odors from a running engine from entering the passenger compartment through the air intake grille....
Hood — removal and installation 1. Open the hood. 2. Cover the fenders and air intake grille with a rag. 3. Outline the hood hinges. 4. Ask the assistant to hold a cowl and turn away bolts of loops on...
Hood locks — removal and installation 1. The hood lock consists of two parts - a latch mounted on the inside of the hood, engaged with a latch mounted on the front bulkhead of the car. Only the locking part...
Hood lock cable — removal and installation 1. The lock drive mechanism consists of a cable, a handle and a flexible sheath. 2. To remove, disconnect the cable from the retainer. After disconnecting the cable,...
Seats — removal and installation 1. Move the seat to failure, first forward then back and unscrew the mounting bolts (photo). 19.1a Loosening the seat bolts 19.1b Parts of the front separate seat 1....
Seat belts — general information 1. The attachment of the belt is shown in the attached photo. At the slightest sign of damage, or after an accident, replace the belts. 2. Clean belts only with soapy...
Center section — removal and installation 1. Remove the armrest cover, remove the plug at the bottom of the glove box. 2. Turn away bolts of the central section and remove section. 3. Installation is carried out...