Car front and rear suspension Nissan Terrano 1 (WD21)
Suspension and steering specifications
Front suspension Adjustment data see text Size G On rear-wheel drive vehicles 6-18 mm On all-wheel drive vehicles 50-60 mm Size L On rear-wheel drive vehicles 49 mm On...
Front suspension Adjustment data see text Size G On rear-wheel drive vehicles 6-18 mm On all-wheel drive vehicles 50-60 mm Size L On rear-wheel drive vehicles 49 mm On...
General information about the suspension
The front suspension of the cars in question is independent, torsion bars are used as elastic elements. The front suspension parts include levers with axles, steering...
The front suspension of the cars in question is independent, torsion bars are used as elastic elements. The front suspension parts include levers with axles, steering...
Wheel studs — replacement
1. Raise the vehicle. 2. Remove the wheel. 3. Remove the brake caliper and disc: 4. On the front wheels, separate the hub from the disc. 5. Screw the nut onto the stud...
1. Raise the vehicle. 2. Remove the wheel. 3. Remove the brake caliper and disc: 4. On the front wheels, separate the hub from the disc. 5. Screw the nut onto the stud...
Stabilizer — removal and installation
1. Raise the front of the vehicle. 2. Remove the mudguard. 3. Unscrew the stabilizer rod nuts (photo). 3.3 Before unscrewing the tie rod nut, mark the washers and...
1. Raise the front of the vehicle. 2. Remove the mudguard. 3. Unscrew the stabilizer rod nuts (photo). 3.3 Before unscrewing the tie rod nut, mark the washers and...
Shock absorbers — removal and installation
Front shock absorbers 1. Turn the wheels, lift the front of the car. 2. Unscrew the rod nut, remove the washer and sleeve (photo). 4.2 Unscrewing the shock absorber rod...
Front shock absorbers 1. Turn the wheels, lift the front of the car. 2. Unscrew the rod nut, remove the washer and sleeve (photo). 4.2 Unscrewing the shock absorber rod...
Torsion bar — removal and installation
1. Raise the front of the vehicle. 2. Unscrew the nuts and remove the adjusting bolt (photo). 5.2 Torsion bar adjusting bolt nut (on all-wheel drive vehicles) 3. Remove...
1. Raise the front of the vehicle. 2. Unscrew the nuts and remove the adjusting bolt (photo). 5.2 Torsion bar adjusting bolt nut (on all-wheel drive vehicles) 3. Remove...
Suspension rods and struts — removal and installation
1. Raise the front of the vehicle. Remove the mudguard (if provided). 2. Unscrew the rod nut (or stretch marks) and remove the washer and bushings (photo). 6.2a Stretch...
1. Raise the front of the vehicle. Remove the mudguard (if provided). 2. Unscrew the rod nut (or stretch marks) and remove the washer and bushings (photo). 6.2a Stretch...
Upper arm and ball joint — removal and installation
1. Raise the front of the car. 2. Remove the wheel. 3. Loosen the upper nut of the shock absorber and compress the shock absorber. 4. Slightly lift the lower arm with a...
1. Raise the front of the car. 2. Remove the wheel. 3. Loosen the upper nut of the shock absorber and compress the shock absorber. 4. Slightly lift the lower arm with a...
Lower arm and ball joint — removal and installation
1. Raise the front of the vehicle. 2. Remove the wheel. 3. Remove the torsion bar. 4. Disconnect the shock absorber from the lower arm. 5. Disconnect the stabilizer from...
1. Raise the front of the vehicle. 2. Remove the wheel. 3. Remove the torsion bar. 4. Disconnect the shock absorber from the lower arm. 5. Disconnect the stabilizer from...
Rear suspension springs — removal and installation
1. Raise the rear of the vehicle and place jack stands under the frame. 2. Raise the rear axle with a jack placed under the gearbox housing. 3. Unscrew the nuts and...
1. Raise the rear of the vehicle and place jack stands under the frame. 2. Raise the rear axle with a jack placed under the gearbox housing. 3. Unscrew the nuts and...
Rear suspension rods — removal and installation
Attention! Remove each barbell separately (except for removing the rear axle). 1. Raise the rear of the vehicle and place jack stands under the frame. 2. Raise the rear...
Attention! Remove each barbell separately (except for removing the rear axle). 1. Raise the rear of the vehicle and place jack stands under the frame. 2. Raise the rear...
Rear suspension stabilizer — removal and installation
1. Raise the rear of the vehicle and support it on stands. 2. Unscrew the stabilizer rod nuts (photo). 11.2 Unscrewing the stabilizer rod nuts 1. Traction 3. Disconnect...
1. Raise the rear of the vehicle and support it on stands. 2. Unscrew the stabilizer rod nuts (photo). 11.2 Unscrewing the stabilizer rod nuts 1. Traction 3. Disconnect...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar information for other Nissan models
➜ Chassis: Car suspension Nissan Sunny 7 (1990-1998)
➜ Chassis: Car suspension Nissan Bluebird T12 (1986-1991)
➜ Chassis: Car suspension Nissan Note 1 (2004-2013)
➜ Chassis: Car suspension Nissan Qashqai 1 (2006-2013)
➜ Chassis: Car suspension Nissan Maxima 4 (1994-1999)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- User manual
- Maintenance
- Power unit
- Engines 4-cylinder
- Engines 6-cylinder
- Engine overhaul
- Cooling and ventilation
- Fuel and exhaust systems
- Engine electrical equipment
- Decreased toxicity
- Transmission
- Mechanical gearbox
- Automatic gearbox
- Clutch and drive shafts
- All-wheel drive system
- Chassis
- Brake system
- Car suspension
- Steering
- Body and electrical equipment
- Body elements
- Doors, locks and windows
- Equipment and devices
Cookies are used to improve the site's performance. 💻 Continue by agreeing to the terms.