Front and rear suspension of the car Nissan Qashqai 1 (J10)
Precautionary measures
Attention. The final tightening of the suspension threaded connections should be done with the vehicle running on the ground. Oil reduces the life of the rubber...
Attention. The final tightening of the suspension threaded connections should be done with the vehicle running on the ground. Oil reduces the life of the rubber...
Front suspension: on-vehicle maintenance
Checking the fasteners Check the reliability of the fastening of the parts (no looseness, no play), their location and condition (presence of wear and tear, damage)....
Checking the fasteners Check the reliability of the fastening of the parts (no looseness, no play), their location and condition (presence of wear and tear, damage)....
Rear Suspension Assembly: On-Car Service
Checking the fasteners Check the reliability of the fastening of the parts (no looseness, no play), their location and sequence (presence of wear and tear, damage)....
Checking the fasteners Check the reliability of the fastening of the parts (no looseness, no play), their location and sequence (presence of wear and tear, damage)....
Wheel alignment: front suspension
Attention. The camber angle of the wheels, as well as the longitudinal and transverse tilt angles of the steering axis are not adjustable If the camber angles, as well...
Attention. The camber angle of the wheels, as well as the longitudinal and transverse tilt angles of the steering axis are not adjustable If the camber angles, as well...
Wheel alignment: rear suspension
Wheel alignment angles are measured on a loaded vehicle. Note: Curb condition is the condition of the vehicle when it is fully fueled, coolant and oiled and ready to...
Wheel alignment angles are measured on a loaded vehicle. Note: Curb condition is the condition of the vehicle when it is fully fueled, coolant and oiled and ready to...
Front axle and front suspension — device
1. Suspension strut mounting insulator. 2. Suspension strut mounting bearing. 3. Compression stroke buffer. 4. Coil spring. 5. Lower rubber seat. 6. Steadfastly. 7. Cap....
1. Suspension strut mounting insulator. 2. Suspension strut mounting bearing. 3. Compression stroke buffer. 4. Coil spring. 5. Lower rubber seat. 6. Steadfastly. 7. Cap....
Front suspension struts — removal and installation
Removal 1. Remove the wheels from the car. 2. Remove the locking plate. 3. Remove the cap and unscrew the mounting nut from the top of the stabilizer bar, then...
Removal 1. Remove the wheels from the car. 2. Remove the locking plate. 3. Remove the cap and unscrew the mounting nut from the top of the stabilizer bar, then...
Front suspension struts — disassembly and assembly
Disassembly Caution: Be careful not to damage the shock absorber rod when removing the strut components. 1. Install the special tool (A) (ST35652000) onto the rack...
Disassembly Caution: Be careful not to damage the shock absorber rod when removing the strut components. 1. Install the special tool (A) (ST35652000) onto the rack...
Front Suspension Wishbone — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Remove the wishbone from the steering knuckle. 3. Remove the wishbone from the subframe. Note: Removing the wishbone from...
Removal 1. Remove the wheels from the car. 2. Remove the wishbone from the steering knuckle. 3. Remove the wishbone from the subframe. Note: Removing the wishbone from...
Front Suspension Wishbone — Checks
Check after removal Check the following and replace parts if necessary: Transverse suspension arm Check the wishbone and bushings for deformation, cracks and damage....
Check after removal Check the following and replace parts if necessary: Transverse suspension arm Check the wishbone and bushings for deformation, cracks and damage....
Front anti-roll bar
Removal 1. Remove the wheels from the car. 2. Remove the outer steering joints from the steering knuckle. 3. Remove the stabilizer struts. 4. Remove the engine...
Removal 1. Remove the wheels from the car. 2. Remove the outer steering joints from the steering knuckle. 3. Remove the stabilizer struts. 4. Remove the engine...
Front Suspension Subframe — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Remove the engine protective pan from the vehicle. 3. Remove the front suspension subframe struts from the vehicle. 4....
Removal 1. Remove the wheels from the car. 2. Remove the engine protective pan from the vehicle. 3. Remove the front suspension subframe struts from the vehicle. 4....
Front Suspension Subframe — Check
Check after removal Check the front suspension subframe for deformation, cracks or damage. Replace with a new one if necessary. Post-installation check 1. Check the...
Check after removal Check the front suspension subframe for deformation, cracks or damage. Replace with a new one if necessary. Post-installation check 1. Check the...
Rear axle and rear suspension — device
1. Rear suspension subframe. 2. Right strut of the rear suspension subframe. 3. Left strut of the rear suspension subframe. 4. Stabilizer bar. 5. Stabilizer bar bushing....
1. Rear suspension subframe. 2. Right strut of the rear suspension subframe. 3. Left strut of the rear suspension subframe. 4. Stabilizer bar. 5. Stabilizer bar bushing....
Rear Suspension Coil Spring — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Loosen the caliper bracket mounting bolts. Caution: Do not press the brake pedal when the triose caliper is removed. 3....
Removal 1. Remove the wheels from the car. 2. Loosen the caliper bracket mounting bolts. Caution: Do not press the brake pedal when the triose caliper is removed. 3....
Rear Suspension Coil Spring — Checks
Check after removal Check the lower link, bushings and coil spring for deformation, cracks and damage. Replace if necessary. Post-installation check 1. Check the wheel...
Check after removal Check the lower link, bushings and coil spring for deformation, cracks and damage. Replace if necessary. Post-installation check 1. Check the wheel...
Rear shock absorbers — removal and installation
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Remove the shock absorber. Installation...
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Remove the shock absorber. Installation...
Rear shock absorbers — checks
Check after removal Check the shock absorber for deformation, cracks and damage. Replace if necessary. Check welded and sealed areas for oil leaks. Replace if necessary....
Check after removal Check the shock absorber for deformation, cracks and damage. Replace if necessary. Check welded and sealed areas for oil leaks. Replace if necessary....
Rear suspension arms — removal and installation
Removal 1. Remove the wheels from the car. 2. Loosen the brake caliper bracket mounting bolts. Caution: Do not press the brake pedal when the brake caliper is removed....
Removal 1. Remove the wheels from the car. 2. Loosen the brake caliper bracket mounting bolts. Caution: Do not press the brake pedal when the brake caliper is removed....
Rear Suspension Arms — Checks
Check after removal Visually inspect the suspension arm and bushings for deformation, cracks and damage. Replace if necessary. Post-installation check 1. Adjust the...
Check after removal Visually inspect the suspension arm and bushings for deformation, cracks and damage. Replace if necessary. Post-installation check 1. Adjust the...
Lower Rear Suspension Links — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Versions with xenon headlights: remove the...
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Versions with xenon headlights: remove the...
Rear suspension lower links — checks
Check after removal Check the lower link and bushings for deformation, cracks or damage. Replace if necessary. Post-installation check 1. Check the wheel alignment...
Check after removal Check the lower link and bushings for deformation, cracks or damage. Replace if necessary. Post-installation check 1. Check the wheel alignment...
Upper Rear Suspension Links — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Remove the wheel speed sensor from the axle...
Removal 1. Remove the wheels from the car. 2. Place a suitable jack under the suspension arm to relieve the coil spring. 3. Remove the wheel speed sensor from the axle...
Upper Rear Suspension Links — Checks
Check after removal Check the upper link and bushings for deformation, cracks or damage. Replace if necessary. Post-installation check 1. Check the wheel alignment...
Check after removal Check the upper link and bushings for deformation, cracks or damage. Replace if necessary. Post-installation check 1. Check the wheel alignment...
Rear Anti-Roll Bar — Removal and Installation
Removal 1. Remove the anti-roll bar struts. 2. Remove the main muffler. 3. Unscrew the stabilizer bracket mounting nuts and the stabilizer bar from the rear suspension...
Removal 1. Remove the anti-roll bar struts. 2. Remove the main muffler. 3. Unscrew the stabilizer bracket mounting nuts and the stabilizer bar from the rear suspension...
Rear Suspension Subframe — Removal and Installation
Removal 1. Remove the wheels from the car. 2. Loosen the brake caliper bracket mounting bolts. Caution: Do not press the brake pedal when the brake caliper is removed....
Removal 1. Remove the wheels from the car. 2. Loosen the brake caliper bracket mounting bolts. Caution: Do not press the brake pedal when the brake caliper is removed....
Rear Suspension Subframe — Checks
Check after removal Check the rear suspension subframe for deformation, cracks or other damage. Replace if necessary. Post-installation check 1. Adjust the parking...
Check after removal Check the rear suspension subframe for deformation, cracks or other damage. Replace if necessary. Post-installation check 1. Adjust the parking...
Wheel rotation
1. Wheel rotation to prevent uneven tire wear must be performed according to service intervals. 2. Tire rotation does not affect the T-shaped spare tire. 3. When...
1. Wheel rotation to prevent uneven tire wear must be performed according to service intervals. 2. Tire rotation does not affect the T-shaped spare tire. 3. When...
Wheel alignment — service data and specification
Note: Checking the wheel alignment angles is performed on a vehicle without load (in equipped condition): all operating fluids and fuel tank are filled; the spare wheel,...
Note: Checking the wheel alignment angles is performed on a vehicle without load (in equipped condition): all operating fluids and fuel tank are filled; the spare wheel,...
Service data
Ball joints: front suspension Wheel arch height Note: The wheel arch height check is performed on an unloaded vehicle (in equipped condition): all operating fluids and...
Ball joints: front suspension Wheel arch height Note: The wheel arch height check is performed on an unloaded vehicle (in equipped condition): all operating fluids and...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar information for other Nissan models
➜ Chassis: Car suspension Nissan Sunny 7 (1990-1998)
➜ Chassis: Car suspension Nissan Bluebird T12 (1986-1991)
➜ Chassis: Car suspension Nissan Terrano 1 (1986-1995, petrol)
➜ Chassis: Car suspension Nissan Note 1 (2004-2013)
➜ Chassis: Car suspension Nissan Maxima 4 (1994-1999)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Faults en route
- Daily checks
- User manual
- Maintenance
- Power unit
- Petrol engines 1.6L (HR16)
- Petrol engines 2.0L (MR20)
- Diesel engines 1.5L (K9K)
- Diesel engines 2.0L (M9R)
- Cooling system
- Engine lubrication system
- Engine power system
- Engine management system
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Car gearbox
- Transfer case and shafts
- Chassis
- Car suspension
- Brake system
- Steering
- Body
- Exterior (external elements)
- Interior (internal elements)
- Safety system
- Heating and air conditioning
- Electrical equipment
- Wiring harnesses
Cookies are used to improve the site's performance. 💻 Continue by agreeing to the terms.