Removing
1. Remove the wheels from the car.
2. Remove the transverse arm from the steering knuckle.
3. Remove the transverse link from the subframe.
Note. Removing the transverse arm from the subframe is difficult because the mounting bolt (indicated in the figure by an arrow) the transverse lever in the rear of the installation area, located in front, abuts when unscrewing the bar of the anti-roll bar. Therefore, to remove the control arm from the subframe, you must first remove the anti-roll bar.
Installation
Installation is made in an order, the return to removal.
Note. Perform final tightening of bolts and nuts at the attachment point (rubber bushing) on an unladen vehicle with wheels on the ground.