Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the wheels from the car.
2. Loosen the brake caliper bracket mounting bolts.
Caution: Do not press the brake pedal when the brake caliper is removed.
3. Remove the brake disc.
4. Remove the wheel speed sensor with wiring from the axle housing and lower link.
5. Loosen the parking brake cable mounting bolt.
6. Remove the anti-roll bar.
7. Versions with xenon headlights: remove the height sensor.
8. Place a suitable jack under the suspension arm to relieve the coil spring.
9. Remove the coil spring from the suspension arm.
10. Remove the suspension arm from the vehicle.
Installation
Installation is carried out in the reverse order of removal.
Note: Perform final tightening of rear suspension components with the vehicle unloaded and wheels on the ground.