Removing
1. Remove the wheels from the car.
2. To turn away bolts of fastening of a bracket of a support.
Attention. Do not press the brake pedal with the triose caliper removed.
3. Remove the wheel speed sensor from the axle housing.
4. Place a suitable jack under the suspension arm.
5. Remove the shock absorber from the suspension arm.
6. Remove the lower link from the suspension arm.
7. Remove the top link from the suspension arm.
8. Versions with all-wheel drive (4WD): Remove the drive shaft.
9. Remove the suspension coil spring from the vehicle.
Installation
Installation is carried out in the reverse order of removal, taking into account the following:
- Align the recess of the lower rubber seat with the groove of the suspension arm and install.
- Install the coil spring by aligning the lower end of the large diameter side with the step between the lower rubber seat and suspension arm.
- Perform the final tightening of the rear suspension elements on an unladen vehicle with wheels on the ground.