Table of contents: Removal ↓ Check after removal ↓
Removal
1. Remove the wheels from the car.
2. Remove the outer steering joints from the steering knuckle.
3. Remove the stabilizer struts.
4. Remove the engine protective pan from the vehicle.
5. Remove the front suspension subframe struts from the vehicle.
6. Remove the rear engine thrust rod.
7. Disconnect the intermediate shaft from the steering gear.
8. Place a suitable jack under the front suspension subframe.
9. Gradually lower the front suspension subframe with a jack to gain access to the anti-roll bar mounting bolts.
10. Loosen the mounting bolts (indicated in the figure by arrows) stabilizer brackets, and then remove the brackets with the stabilizer bar bushings from the front suspension subframe.
11. Remove the anti-roll bar.
Check after removal
Check the stabilizer bar, stabilizer struts, bushings and stabilizer bar brackets for deformation, cracks or damage. Replace if necessary.