External and internal elements of the body Nissan Sunny 7 (B13)
Front bumper — removal and installation Removing 1. Raise the front of the car and place on stands. 2. Remove the screws (photo on the left) and remove the lower mudguards (photo on the right). Sedan and...
Rear bumper — removal and installation Removing 1. Raise the rear of the car and place on stands. Sedan and hatchback cars 2. Remove the 2 screws securing the bumper pads to the rear fender (photo on the...
Hood — removal, installation and adjustment Removing 1. Open the hood, mark the position of the hinges on the hood. 2. Release the washer hose from the brackets by disconnecting from the fitting. 3. Loosen the...
Hood lock cable — removal and installation 1. Open the hood. 2. Carefully move the front grille and remove the cable from the brackets. 3. Loosen the three bolts and remove the lock. 4. Pull the spring and...
Hood lock — removal and installation Removing Sedan and hatchback cars 1. Open the hood. 2. Turn the front grille latches 1/4 turn counterclockwise and remove the grille. 3. Turn away bolts and remove the...
Body trim — removal and installation Front grille 1. Open the hood, move the grille forward, turn the screws 1/4 turn (shown by arrow) and remove the grate. 2. When installing, insert the bottom tabs of the...
Seats — removal and installation Front seat 1. Disconnect the battery from the ground. 2. Move the seat forward as far as it will go with the adjuster. 3. Remove the trim from the outer seat rail. 4....
Interior trim panels — removal and installation Internal cladding panels are fastened with metal or plastic latches or clips, which are recommended to be removed with a fork puller. In some places, to remove this...