Front seat
1. Disconnect the battery from the ground.
2. Move the seat forward as far as it will go with the adjuster.
3. Remove the trim from the outer seat rail.
4. Loosen the screw and remove the trim from the inner rail.
5. Loosen the rear seat bolts.
6. Move the seat all the way back and unscrew the front bolts.
7. Tilt the seat back and disconnect the connector under the seat.
8. Remove the seat.
Rear seat cushion
1. Fold the backrest, unscrew the bolts and nuts securing the hinge to the floor and remove the seat cushion with hinges.
2. Install the cushion in reverse order.
Rear seat armrest
1. Fold the pillow forward and back.
2. Loosen the screws at the bottom of the roller, unhook the armrest and remove.
3. Install the armrest in reverse order.