Automatic transmission — removal and installation Automatic transmissions are installed on cars with 1.4 and 1.6 liter engines. The transmission consists of a torque converter, a planetary gear and multi-plate hydraulic...
Transmission control cable — removal and installation Transmission control cable 1. Selector; 2. Fastening the cable to the floor; 3. Gender; 4. Rope; 5. Bracket; 6. Bracket; 7. Cable sheath nut; 8. Transmission lever Cable...
Mode selector — removal and installation Selector details 1. Overlay indicating the position of the selector; 2. Button; 3. Spring; 4. Handle; 5. connector; 6. Control lamp; 7. Cable sheath bracket; 8. Rope; 9....
The cable of switching to a reduced speed When the damper is fully open (kick-down) Kick-down cable adjustment 1. Throttle cam; 2. Bracket; 3. Rope sheath; 4. Retainer; 5. Rope lock housing Adjustment 1. Check...
Replacement of automatic transmission oil seals Proper installation of axle shaft seals 1. Oil seal Size A (right axle shaft seal) 5.5–6.5 mm Size B (left axle seal) no more than 0.5 mm Replacement Axle oil seal 1....
Double reverse switch and starter lock Dual Switch Adjustment 1. switch lever; 2. Transmission selector lever; 3. Adjustment holes; 4. Drill bit 4 mm The switch is screwed into the front of the transmission...
Overload switch — removal, inspection and installation Examination 1. Remove the center section of the front panel. 2. Disconnect the wires from the overload switch and test lamp. 3. Check the resistance between pins 1 and...