Doors, locks and windows of the car Nissan Sunny 7 (B13)
Front doors — removal, installation and adjustment
Removal and installation 1. Disconnect the battery from ground. 2. Remove the inner door panel (see subsection 13.11 ). 3. Disconnect all connectors, mark the wiring...
There is 1 comment
Removal and installation 1. Disconnect the battery from ground. 2. Remove the inner door panel (see subsection 13.11 ). 3. Disconnect all connectors, mark the wiring...
There is 1 comment
Inner door panel — removal and installation
Removal 1. Disconnect the battery from ground. 2. On vehicles with manual windows, use a thin tool to pry the handle off the latches. Remove the trim. 3. Carefully pry...
Removal 1. Disconnect the battery from ground. 2. On vehicles with manual windows, use a thin tool to pry the handle off the latches. Remove the trim. 3. Carefully pry...
Door lock, lock switch and handle parts
Lock 1. Disconnect the battery from ground, remove the inner door panel. 2. Disconnect the rod from the lock (shown by arrows). 3. Loosen the lock mounting screws (shown...
Lock 1. Disconnect the battery from ground, remove the inner door panel. 2. Disconnect the rod from the lock (shown by arrows). 3. Loosen the lock mounting screws (shown...
Door glass and window lifter — removal and installation
Glass 1. Remove the panel and screen. 2. Install the window lift handle (or connect the switch connector, connect the battery to ground). 3. Lower the glass so that the...
Glass 1. Remove the panel and screen. 2. Install the window lift handle (or connect the switch connector, connect the battery to ground). 3. Lower the glass so that the...
Trunk lid (sedan) — removal and installation
Removal 1. Disconnect the battery from ground. 2. Lift the lid. 3. Remove the inner cover panel by releasing the latches. 4. Disconnect the connector and pull the...
Removal 1. Disconnect the battery from ground. 2. Lift the lid. 3. Remove the inner cover panel by releasing the latches. 4. Disconnect the connector and pull the...
Cargo compartment lid (coupe and hatchback)
Racks 1. Lift the lid and secure it with a support. 2. On coupe and 5-door hatchback vehicles, loosen the lock nut, unscrew the hinge pin and remove the hinge. 3. On a...
Racks 1. Lift the lid and secure it with a support. 2. On coupe and 5-door hatchback vehicles, loosen the lock nut, unscrew the hinge pin and remove the hinge. 3. On a...
Trunk lid lock (sedan)
Lock 1. Disengage the latches around the cover outline and remove the inner panel. 2. Disconnect the latches from the lock cover. 3. Remove and move the trunk light...
Lock 1. Disengage the latches around the cover outline and remove the inner panel. 2. Disconnect the latches from the lock cover. 3. Remove and move the trunk light...
Cargo compartment lid lock and handle
Lock 1. Disconnect the battery from ground. 2. Remove the inner panels of the lid. 3. Disconnect the drive rod from the lock. 4. Disconnect the trunk light switch...
Lock 1. Disconnect the battery from ground. 2. Remove the inner panels of the lid. 3. Disconnect the drive rod from the lock. 4. Disconnect the trunk light switch...
Central locking parts — removal and installation
Electric door switch central locking 1. Remove the door lock. 2. The switch is attached to the lock with two screws. 3. Install a door lock. Central door lock motor 1....
Electric door switch central locking 1. Remove the door lock. 2. The switch is attached to the lock with two screws. 3. Install a door lock. Central door lock motor 1....
External glass — removal and installation
Mirror assembly 1. If the mirror is equipped with an electric drive, disconnect the battery from the ground. 2. If the mirror is manually adjustable, unscrew the screw...
Mirror assembly 1. If the mirror is equipped with an electric drive, disconnect the battery from the ground. 2. If the mirror is manually adjustable, unscrew the screw...
Windscreen, rear window and fixed glass
The glass is installed in the body openings on seals and secured with special glue. It is not recommended to change this glass yourself, as this requires certain skills.
The glass is installed in the body openings on seals and secured with special glue. It is not recommended to change this glass yourself, as this requires certain skills.
Sunroof in a car
It is recommended that all repair and adjustment work on the mechanical sunroof be performed at a car service center. If the sunroof is electric, then if the drive...
It is recommended that all repair and adjustment work on the mechanical sunroof be performed at a car service center. If the sunroof is electric, then if the drive...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar information for other Nissan models
➜ Body: Doors, locks and windows Nissan Serena 2 (1999-2005)
➜ Body: Doors, locks and windows Nissan Bluebird T12 (1986-1991)
➜ Body and electrical equipment: Doors, locks and windows Nissan Terrano 1 (1986-1995, petrol)
➜ Body: Doors, hood and locks Nissan Note 1 (2004-2013)
➜ Body: Doors, locks and windows Nissan X-Trail 2 (2007-2013, petrol)
➜ Body: Doors, locks and windows Nissan Maxima 4 (1994-1999)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- User manual
- Faults en route
- Maintenance
- Power unit
- Petrol engines (1.4 and 1.6)
- Engine overhaul (1.4 and 1.6)
- Petrol engines (2.0)
- Engine overhaul (2.0)
- Diesel engine
- Cooling system
- Heating and ventilation
- Power system (carburetor)
- Power system (injector)
- Fuel injection system
- Single point injection
- Multi-point injection
- Decreased toxicity
- Engine electrical equipment
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Brake system
- Car suspension
- Steering
- Body
- Body repair
- Body elements
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Electrical circuits
Cookies are used to improve the site's performance. 💻 Continue by agreeing to the terms.