Table of contents: Mirror assembly ↓ Optical element ↓
Mirror assembly
1. If the mirror is equipped with an electric drive, disconnect the battery from the ground.
2. If the mirror is manually adjustable, unscrew the screw and remove the handle.
3. Remove the door panel.
4. Remove the two screws and remove the corner panel of the mirror.
5. Detach the door screen at the upper front corner.
6. Disconnect the mirror drive connector and remove the wires from the brackets.
7. Remove the screws and take out the mirror.
8. Install the mirror in reverse order.
Optical element
1. If the mirror is equipped with heating, disconnect the battery from the ground.
2. Hook the element by the frame and remove it by releasing the latches.
3. Disconnect the wiring from the element (heated mirror) and remove the element.
4. Connect the wires, insert the optical element, securing it with latches.