Lock
1. Disconnect the battery from ground, remove the inner door panel.
2. Disconnect the rod from the lock (shown by arrows).
3. Loosen the lock mounting screws (shown by arrows).
4. Remove the lock together with the electric drive (if provided).
5. The lock is installed in the reverse order. Lubricate the screws with a fixing compound.
Lock switch and outside handle
1. Disconnect the battery from ground, remove the inner door panel.
2. Disconnect the rod from the drive levers.
3. Unscrew the nuts and remove the handle (the arrows show the door handle mounting nuts).
4. Disconnect the rod from the switch, remove the bracket and take out the switch.
5. The switch is installed in the reverse order.
Inner handle
1. Remove the decorative handle cover.
2. Loosen the screws and remove the handle.
3. Disconnect the rod from the handle.
4. The handle is installed in the reverse order.