Door lock and handles — removal and installation (Nissan Terrano 1)

1. Remove the inner door panel.

2. Carefully remove the plastic water shield.

3. Disconnect the inner handle rod from the lock.

4. Loosen the screws and remove the inner handle.

5. Remove the bracket and remove the cylinder switch of the lock.

6. Disconnect the drive rod from the lock.

7. Unscrew 3 screws and remove the lock.

8. If necessary, unscrew the 2 screws and remove the outer handle.

9. Installation is performed in the reverse order. Lubricate the rubbing surfaces of the levers and springs with consistent grease.