Vehicle cooling and heating system Nissan Primera 1 (P10)
Specifications of the cooling and heating system Common parameters Note. Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold Design Thermosyphon with a...
General information about the cooling and heating system The engine is equipped with a circulation cooling system. A vane water pump is used to circulate the coolant. The cooling system works with a separate expansion tank. A...
Mounting the radiator on the injection engine Mounting the radiator on the injection engine. With a carbureted engine installed, only one radiator is installed 1 - radiator mount; 2 - radiator cap; 3 - bypass hose;...
Removal and installation of a radiator Removing When removing and installing, follow illustration above . On models with a carbureted engine, only one fan is installed, which is fixed in the same way. 1....
Radiator and cap check If a radiator pressurization pump is available, it can be installed on the radiator and pressurized to 1.6 bar. The pressure in the system must not drop. If the pressure...
Water pump — removal and installation The water pump is not disassembled and in case of failure or damage is replaced. Check bearing shaft clearance in bearing and impeller for rust. The pump does not use...
Thermostat — design and verification The thermostat is located in the housing, which is installed in different places on the injection and carburetor engines. On a carbureted engine, it is screwed to the...