Table of contents: Checking the coolant ↓ Replacing the coolant ↓
The engine cooling system is filled at the factory with high-quality cooling liquid, which is intended for year-round use and has a long service life. The cooling liquid has a low freezing point and contains a complex of anti-corrosion additives. Therefore, additional additives are not required.
Checking the coolant
Engine QR25
MR20 engine.
- The coolant level in the expansion tank must be checked on a cold engine. If the fluid level has dropped below the MIN mark (2), which is located on the wall of the expansion tank, then add fluid and bring its level to the MAX mark (1).
- If there is no coolant in the expansion tank, check the coolant level in the radiator (only on cold engine). If necessary, add the recommended coolant to the radiator and bring its level to the base of the neck and then add liquid to the expansion tank up to the MAX mark (1).
Replacing the coolant
It is recommended that the coolant be replaced at a service station.