Warning! If the car stereo system is equipped with a security code, make sure you have the correct combination to activate the audio system before disconnecting the battery!
2. Remove the two screws securing the lower edge of the interior trim panel.
3. Using a screwdriver, carefully pry the front edge of the window lift control panel out of the armrest and disconnect the electrical wiring from the removed panel.
4. Remove the inner door handle trim.
5. Remove the mounting screw located in the pocket of the armrest grip handle.
6. Pull the interior trim panel away from the door and disconnect the electrical wiring connectors running underneath it.
7. In order to provide access to the inside of the door frame, remove the protective insulation screen - try not to damage the film. Do not forget to put the screen back in place before installing the trim panel. If necessary, additionally use sealant to secure the film.
8. Make sure that all standard fasteners of the interior door trim panel are in good condition and in place.
9. Restore the original wiring connections and install the trim panel onto the door. Snap the clips into place and tighten the mounting screws. Install the power window control panel in place.
Original publication on the portal: www.nissanbook.ru