Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if it is accidentally deployed (see chapter Onboard electrical equipment). SRS circuit wiring is easily identified by the yellow color of the insulation.
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Apply the parking brake.
3. Using a screwdriver, remove the transmission selector lever trim.
4. Turn out four screws of fastening of the console.
5. Disconnect electroconducting and remove the console from the car.
6. Installation is carried out in the reverse order.