Removing
The operation numbers correspond to the part numbers in the figure.
First disconnect the wires from the battery and the airbag connectors. Remove the driver airbag module and steering wheel (see chapter «Safety system»).
1. Remove a casing of a steering column and understeering switches, having turned away fixing screws.
2. Remove the bottom panel from the driver's side.
3. Remove an overlay of the console of the panel of devices.
4. Remove an overlay of a combination of devices.
5. Remove a combination of devices.
6. Remove the heater and air conditioner control panel.
7. Remove the glove box. To do this, remove the pins and disconnect the passenger airbag module connector.
8. Remove the passenger airbag module (see chapter «Safety system»).
9. Remove a cover of the lever of a gear change or an overlay of the selector.
10. Remove the rear console box. To access the screws, remove the plugs.
11. Remove the center console by unscrewing the screws and bolt. To access the bolt, remove the trim.
12. Remove the instrument panel plugs and disconnect the connectors.
13. Remove the A-pillar trims, which are attached with two metal clips in the middle and are hooked to the instrument panel from below.
14. Turn away bolts and nuts of fastening of the panel of devices, remove the switch of an external rear-view mirror and disconnect a socket. Remove the instrument panel.