Instructions for working with airbags Do not use an electrical tester to test security circuits. Before working on the system, turn off the ignition, disconnect both wires from the battery, and wait at least...
Control unit — removal and installation WARNINGS: Before working on the security system, turn off the ignition, disconnect both wires from the battery and wait at least 10 minutes. Work on the side of the...
Steering wheel airbag Removing the airbag and coiled cable WARNINGS: Before working on the security system, turn off the ignition, disconnect both wires from the battery and wait at least 10...
Airbag on the instrument panel — removal and installation WARNINGS: Before working on the security system, turn off the ignition, disconnect both wires from the battery and wait at least 10 minutes. Work on the side or bottom...
Self-diagnosis of the security system Diagnostic Modes During normal operation, the control unit operates in the fault alarm mode. After the ignition is switched on, the airbag warning light comes on for 7...