Application of sealant as a «liquid gasket» Remove all traces of old sealant from mating surfaces and grooves before applying sealant. Degrease surfaces thoroughly. Apply a continuous bead of sealant to the...
Special tools and fixtures KV10115801, KV10115800 — Wrench for SR engine oil filter KV10105900 - Oil filter wrench for GA and CD engines ST19300001 — Oil filter wrench for GA and CD engines...
Oil pressure check WARNINGS: Be careful not to burn yourself with hot oil. Carry out the check only in the neutral position of the transmission. 1. Check the oil level. 2. Turn out the...
Oil pump — removal and installation Removal and installation - SR engine 1. Remove drive belts. 2. Remove the cylinder head (see chapter « Engine »). 3. Remove the oil pan (see chapter « Engine »). 4....
Oil pump — disassembly, inspection and assembly Disassembly and assembly Dismantling the oil pump does not have any features. When assembling, please note the following: The seal, gasket and O-ring must be replaced...
Bypass valve Check the valve ball for any binding. If there are any defects, remove the valve by prying it with a suitable tool and press in a new one. On SR engines up to 04.96, the...
Oil cooler — check SR engine In SR engines, an oil cooler is installed from 04.96. Before removing the cooler, drain the oil to the coolant. Check for cracks in the cooler housing. Make...