General Precautions Use only recommended brake fluid (DOT 3 or DOT 4). Do not reuse drained brake fluid. Avoid spilling brake fluid on painted surfaces. When removing and installing...
Special tools and fixtures KV30101600 - new sample, KV30101000 - old sample. Drift for centering clutch disc a: 15.9 mm b: 17.9 mm c: 40 mm ST20050240 Diaphragm spring adjustment key a: 150 mm b:...
Clutch pedal adjustment 1. Adjust the height of the clutch pedal using the limiter. Pedal height H, mm: Models with CD20 engine: Left hand drive models - 149-159 Right hand drive models -...
Bleeding the hydraulic clutch During pumping, constantly monitor the level of fluid in the tank. 1. Fill the reservoir to the top with the recommended brake fluid. 2. Attach clear vinyl tubing to the...
Clutch damper — device and check Examination Check the piston and cylinder surfaces for uneven wear, corrosion and damage. Check damping stop and piston o-ring for cracks, deformation or damage. Replace...
Clutch release mechanism Removal and installation To remove the clutch release bearing, pull out the holders. To remove the clutch release fork, knock out the spring pins by aligning them with...
Driven clutch disc Examination Check the sheet for burnt areas, local discoloration indicative of overheating, and oiling. Replace disk if necessary. Check the degree of wear of the...
Clutch cover and flywheel Check and adjustment Check up uniformity of an arrangement of petals of a diaphragm spring on height, without removing a casing of coupling. Permissible spread (at the...