Clutch — general information On models with a manual transmission, a single-plate clutch is used. The hub of the driven disk is equipped with splines and moves freely on them along the splines on...
Master Cylinder Service Removing Clutch Master Cylinder Location on 4.2L Models 1. Cover the right front mudguard with protective covers. 2. Disconnect the hydraulic tube from the master...
Slave Cylinder Servicing Removing Location of the slave cylinder and related components on 3.0L models 1. Jack up the front of the car and place it on jack stands. 2. Disconnect the hydraulic...
Servo Servicing — Removal, Inspection and Installation Functional check 1. With the engine off, depress the clutch pedal several times to remove vacuum from the servo unit. 2. Lightly depress the pedal and hold it in this...
Clutch pedal maintenance — removal and installation Removing Clutch Pedal Components 1 - axial bolt; 2 - bushing; 3 - pedal; 4 - clutch; 5 - washer; 6 - return spring; 7 - nut 1. In the car, disconnect the pusher from the...
Bleeding the hydraulic system 1. Jack up the front of the car and place it on jack stands. 2. Make sure the master cylinder reservoir is filled with clean hydraulic fluid. 3. Connect a piece of...
Clutch adjustments Adjusting the height of the position and the amount of free play of the clutch pedal. Note. The height of the clutch pedal position is measured at the required position...