Front axle and vehicle suspension Nissan Patrol 4 (Y60)
Front axle and suspension — general information The front axle is equipped with a crankcase "banjo", inside which the hypoid assembly of the main gear and fully unloaded drive shafts are located. Assembling the...
Maintenance of front wheel hubs and drive shafts Note. The following special tools are required to perform the procedures below: 53mm replacement socket (models with manual hub shifting), or homemade nozzle (models...
Final drive assembly service Note. The following special tools are required for the following procedures: Stillson wrench and pinion flange puller (to replace the drive gear oil seal); the tools...
Front axle assembly service — removal and installation Models Hardtop (Hardtop) and Universal (Station Wagon) Removing 1. Loosen the front wheel nuts. 2. Jack up the front of the car and place it on jack stands placed under...
Servicing shock absorbers (spring suspension) Removing 1. Jack up the front of the car and place it on jack stands under the front axle housing. 2. Give a nut of fastening of the top end of the shock-absorber to the...
Servicing shock absorbers (spring suspension) Removing 1. Jack up the front of the car and place it on jack stands under the front axle housing. 2. Give a nut of fastening of the top end of the shock-absorber to the...
Removal and installation of longitudinal suspension arms Note. The following procedures require a press, suitable mandrels and pipes. Removing 1. Jack up the front of the vehicle on the appropriate side and place it on jack...