Applying sealant as a «liquid gasket» (Nissan Almera N15)

Before applying a layer of sealant, remove all traces of old sealant from the mating surfaces and grooves. Thoroughly degrease the surfaces.

Apply a continuous bead of sealant to the surfaces to be sealed (use Genuine Liquid Gasket or equivalent).

The roller diameter should be within 2.0-3.0 mm.

The sealant should go around the holes in a circle from the inside.

Assembly must be completed within 5 minutes after application of the sealant.

[The source is published on the portal: Nissanbook.ru]

Wait at least 30 minutes before adding engine oil or coolant.

NOTE: In the following, unless a specific sealant type is specifically stated, Genuine Liquid Gasket or similar sealant is implied.