- Remove the wheel from the car.
- Locate air leaks by inflating the tire to 3.45 bar and submerging the wheel in a container of water.
- Mark the leaky areas and remove the tire from the wheel.
- Sand the inside of the wheel in the affected area and then clean the treated area with a general purpose cleaner. Apply a sealing patch to the defective area and wait 12 hours for the glue to dry completely.
- Place the tire on the wheel, inflate it to 3.45 bar and check the wheel for leaks.
- Bring the air pressure in the tire to the correct level.
- Balance the wheel.
- Install the wheel assembly onto the vehicle.
- Tighten the wheel mounting bolts using a torque wrench to 98.1 - 127 Nm.
(Original text on the website: nissanbook)