The braking system of car Nissan Murano 1 (Z50)
Brake system — general description
The braking system consists of a master cylinder, a brake booster, and front and rear disc brakes. The front brakes have an automatic wear compensation device for the...
The braking system consists of a master cylinder, a brake booster, and front and rear disc brakes. The front brakes have an automatic wear compensation device for the...
Brake pedal — removal and installation
Brake pedal mounting elements Non-adjustable pedal 1 — brake pedal bracket; 2 — cotter pin; 3 - clamp; 4 — brake light switch; 5 - pedal cover; 6 - pin with a hole for a...
Brake pedal mounting elements Non-adjustable pedal 1 — brake pedal bracket; 2 — cotter pin; 3 - clamp; 4 — brake light switch; 5 - pedal cover; 6 - pin with a hole for a...
Brake master cylinder — removal and installation
Components of the master cylinder of vehicles without VDC 1 - tank lid; 2 - mesh filter; 3 - hose and clamp; 4 - clamp; 5 — bracket; 6 — tank; 7 — bushing; 8 — piston...
Components of the master cylinder of vehicles without VDC 1 - tank lid; 2 - mesh filter; 3 - hose and clamp; 4 - clamp; 5 — bracket; 6 — tank; 7 — bushing; 8 — piston...
Brake booster — removal, inspection and installation
1 - master brake cylinder; 2 - brake fluid reservoir; 3 - brake booster; 4 - gasket; 5 — lock nut. Removal Caution: When removing the brake booster, be careful not to...
1 - master brake cylinder; 2 - brake fluid reservoir; 3 - brake booster; 4 - gasket; 5 — lock nut. Removal Caution: When removing the brake booster, be careful not to...
Checking the check valve
Check the vacuum using a vacuum pump. Connect the pump to the brake booster side. The vacuum reduction should be within 1.3 kPa (10 mmHg.) in 15 seconds at a vacuum...
Check the vacuum using a vacuum pump. Connect the pump to the brake booster side. The vacuum reduction should be within 1.3 kPa (10 mmHg.) in 15 seconds at a vacuum...
Inspection and replacement of hydraulic tubes and hoses
The pressure value in hydraulic tubes is generally not determined. Test pressures for the front brakes are 100 kg/cm³. These pressures are given for a cold brake system....
The pressure value in hydraulic tubes is generally not determined. Test pressures for the front brakes are 100 kg/cm³. These pressures are given for a cold brake system....
Disc brakes — removal and installation
Rear disc brake components 1 - connecting (hollow) bolt; 2 - brake hose; 3 - copper washer; 4 - cap; 5 - air bleed valve; 6 — guide pin mounting bolt; 7 — brake cylinder...
Rear disc brake components 1 - connecting (hollow) bolt; 2 - brake hose; 3 - copper washer; 4 - cap; 5 - air bleed valve; 6 — guide pin mounting bolt; 7 — brake cylinder...
Parking brake — removal and installation
The cable-operated parking (emergency) brake is a completely separate, independent system, acting only on the rear wheels. When you press a pedal in the cabin, cables...
The cable-operated parking (emergency) brake is a completely separate, independent system, acting only on the rear wheels. When you press a pedal in the cabin, cables...
Checking the technical condition of the brake system
The brake system is checked on a dry, clean and fairly level area with good coverage. Reliable testing of the brake system condition on wet or muddy surfaces (including...
The brake system is checked on a dry, clean and fairly level area with good coverage. Reliable testing of the brake system condition on wet or muddy surfaces (including...
Brake system fault diagnostics
Sign of malfunction Possible cause Solution 1 2 3 The brake pedal free play is too great All or some of the pads are worn out Adjust or replace brake pads One of the...
Sign of malfunction Possible cause Solution 1 2 3 The brake pedal free play is too great All or some of the pads are worn out Adjust or replace brake pads One of the...
Anti-lock braking system (ABS)
Location of anti-lock braking system components on a vehicle I - right front wheel; II - right rear wheel; III - left front wheel; IV - left rear wheel; 1 — speed sensor...
Location of anti-lock braking system components on a vehicle I - right front wheel; II - right rear wheel; III - left front wheel; IV - left rear wheel; 1 — speed sensor...
Operation of ABS system components
Hydraulic device The hydraulic unit is located in the same location where the master cylinder and brake booster would be on a conventional brake system. This includes: a...
Hydraulic device The hydraulic unit is located in the same location where the master cylinder and brake booster would be on a conventional brake system. This includes: a...
ABS self-diagnosis
To display the self-diagnostic results on the ABS indicator, you must drive at a speed of at least 15 km/h for at least one minute, then stop with the engine running....
To display the self-diagnostic results on the ABS indicator, you must drive at a speed of at least 15 km/h for at least one minute, then stop with the engine running....
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar information for other Nissan models
➜ Chassis: Brake system Nissan Almera 1 (1995-2000)
➜ Chassis: Brake system Nissan Patrol 4 (1987-1997, petrol)
➜ Chassis: Brake system Nissan Primera 1 (1990-1996, petrol)
➜ Chassis: Brake system Nissan Maxima 4 (1994-1999)
➜ Chassis: Brake system Nissan Sunny 7 (1990-1998)
➜ Chassis: Brake system Nissan Serena 2 (1999-2005)
Link in different formats to this section
TEXTHTMLBB Code
- General information
- Introduction to manual
- Maintenance
- Power unit
- Gasoline engines
- Engine overhaul
- Lubrication system
- Cooling system
- Fuel system
- Engine management
- Exhaust system
- Transmission
- Variator (CVT)
- Transfer case
- Drive shafts
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering system
- Wheels and tires
- Brake system
- Body
- Body elements
- Electrical equipment
- Power devices
- Lighting and signaling
- Equipment and devices
- Electrical circuits
Cookies are used to improve the site's performance. 💻 Continue by agreeing to the terms.