Table of contents: Rear window washer nozzle - removal…↓ Check valve - installation ↓
Rear window washer nozzle - removal and installation
- Remove the additional (upper) brake light.
- Loosen the rear window washer nozzle mounting screw and remove the nozzle.
1 — rear window washer nozzle; 2 - additional brake signal; 3 — mounting screw.
Installation is carried out in the reverse order of removal, taking into account the following:
♦ Tighten the rear window washer nozzle mounting screw to a torque of 0.3–0.5 N·m.
♦ After tightening the rear window washer nozzle mounting screw, check that the rear window washer nozzle does not move when pulled down with a force of 49 N (5 kg). If the rear window washer nozzle moves, replace it along with the additional brake light.
Check valve - installation
The control valve is located in the windshield washer pipe. Be careful not to confuse the direction of installation of the control valve in the tube (arrows).
1 - from the windshield washer reservoir; 2 - control valve; 3 - to the jet.
Rear window washer components location
1 — rear window washer nozzle; 2 — control valve.