Table of contents: Automatic air conditioning system ↓ Automatic climate control (AUTO) ↓
Central ventilation grilles.
To open or close the ventilation grilles, turn the handwheel in the required direction.
- Symbol
means that the ventilation grill is open. - Symbol
means that the ventilation grill is closed.
To change the direction of the air flow, move the central control up/down or right/left.
Side ventilation grilles.
Rear ventilation grilles.
Automatic air conditioning system
1. Air distribution mode switch; 2. Air temperature regulator; 3. Fan speed controller; 4. Rear window defroster button; 5. Switch for outside air supply modes (
) and recirculation (
); 6. Air conditioner on/off button.Automatic climate control (AUTO)
- AUTO mode can be used all year round as the system automatically maintains a constant temperature and controls air flow distribution and fan performance.
- To turn off the heater and air conditioner, turn the fan speed control to the OFF position.
Cooling and dehumidifying the air supplied to the passenger compartment
1. Turn the fan speed control and air distribution mode switch to the AUTO position.
2. If the A/C indicator does not light, press the A/C button.
3. Turn the air temperature regulator to the desired position.
4. Press and hold the outside air/recirculation mode switching button for more than 1.5 seconds until the indicators (
and 
) will not blink twice. After this, the recirculation and outside air supply modes will be switched on automatically.
When cold air from the ventilation grilles enters a hot and humid interior, steam may form. This does not indicate a malfunction of the system.
Heating (the air conditioner is off)
1. Turn the fan speed control and air distribution mode switch to the AUTO position.
2. If the A/C indicator comes on, press the A/C button.
3. Turn the air temperature regulator to the desired position.
4. Press the outside air supply and recirculation mode switching button and hold it for more than 1.5 seconds until the indicators (
and 
) will not blink twice. After this, the recirculation and outside air supply modes will be switched on automatically.
- Do not set the temperature lower than the outside temperature. Otherwise, the system will not function normally.
- If the windows fog up, use the dehumidification mode instead of the heating mode with the air conditioner off.
Blowing glass with pre-dried air
1. Turn the fan speed control to the desired position.
2. Turn the air distribution mode switch to the position
.
3. Turn the air temperature regulator to the required position.
To quickly remove ice from the outer surface of the windshield, set the temperature and fan speed controls to maximum.
Once the ice has been removed from the windows, turn the air distribution mode switch to the AUTO position to set the automatic operation mode.
If the position is selected
or 
that:
- the air conditioner will automatically turn on when the outside air temperature is above -5°C in order to eliminate fogging of the windshield;
- the air recirculation mode will automatically turn off.