- The air conditioning and heating system can only operate when the engine is running.
- The fan will operate when the engine is not running and the ignition is on; the outside air intake mode will be activated to accelerate the removal of condensation.
Manual control of the system
To turn off the heater and air conditioner, turn the fan speed control to the OFF position.
Fan speed control
To increase the fan speed, turn the regulator clockwise, and to decrease it, turn it counterclockwise. If the regulator is set to AUTO, its performance will change automatically.
Air distribution control
Turn the knob to select the desired air distribution mode.
Air enters the passenger compartment through the central and side ventilation grilles.
Air enters the cabin through the central and side air vents, as well as through the lower air vents.
The article was copied from here: nissanbook.ru
Air enters the cabin through the lower vents.
Air enters the passenger compartment through the windshield defroster grilles and lower vents.
Temperature regulation
Turn the air temperature regulator to the required position.
Air recirculation
- Press the air recirculation button
/outdoor air supply 
, in order to change the air circulation mode. - Turn on the indicator under the button (
) indicates that the air recirculation mode is enabled.
Supply of outside air
- Press the air recirculation button
/supply of outside air in order to change the air circulation mode. - Turn on the indicator under the button (
) indicates that the outside air supply mode is turned on.
Automatic air supply control
- Press the outside air supply button
and recirculation 
and hold it for more than 1.5 seconds until the indicators (
and 
) will not blink twice. After this, the air supply mode will be switched on automatically. - If the position is selected
or 
then the recirculation mode will not turn on.