2. Remove the bolt securing the anti-roll bar to the suspension at the bottom of each rear suspension strut (photo).
17.2 The rear anti-roll bar is bolted to the base of each suspension strut
3. Unscrew the clamps of the anti-roll bar (photo), remove the rod from under the car.
17.3. Fastening the anti-roll bar to the body
4. If necessary, the gearshift levers can be unscrewed from the bottom.
5. Check the condition of the components, all rubber bushings, replace them if necessary.
[Data taken from this portal: NissanBook.ru]
6. When installing, first clean the areas around the rod attachment points. Tighten the bolts lightly.
7. Lower the vehicle and rock it to settle the suspension components.
8. Tighten the suspension bolts, clamp bolts (they should be compressed evenly) and the lock nuts of the linkage with the tightening torque specified in Specifications.