2. Outline the latch assembly with a marker.
3. Disconnect the electrical wiring and the executive rod connecting the latch to the lock cylinder.
4. Turn out fixing bolts and remove a latch of the lock.
5. Installation is carried out in the reverse order.
Lock cylinder
1. Open the trunk lid. Prying off the latch buttons with a special tool, separate the lower edge of the lid inner upholstery panel in order to provide access to the lock latch assembly.
2. Through the service hole located near the assembly of the right combined lamp, release the lock actuator rod from its retainer and remove the lock assembly mounting plate. Disconnect the electrical wiring from the lock activator if the vehicle is equipped accordingly.
3. Turn the lock 45°and remove the assembly from the trunk lid.
4. Installation is carried out in the reverse order.