Warning! The bulbs of halogen lamps are filled with pressurized gas and may explode if shaken violently. Try to take such lamps only by the base and use safety glasses. Remember that when touching the bulb with bare fingers, grease stains remain on the glass, which leads to premature failure of the lamp as a result of overheating. Before installation, wipe the lamp bulb with alcohol.
1. Open the hood. Locate the lamp assembly on the back of the headlight housing. When replacing the right headlight bulb, remove the plastic shield.
2. Disconnect electrical wiring and remove retaining ring.
3. Remove the bulb assembly with the cartridge from the headlight housing.
4. Trying not to touch the flask, release the lamp from the cartridge and install a replacement one in its place. Insert the assembly into the headlight housing and secure it with the circlip.
5. Connect electrical wiring. Check the headlights for proper operation. Close the hood.