When replacing the lamp, hold it only by the plastic base. Do not touch the glass bulb with your fingers.
1. Disconnect the ground wire from the battery.
2. Disconnect the connector at the back of the headlight.
3. Turn the bulb retaining ring counter-clockwise until it releases from the reflector and remove the bulb together with the holder.
4. Remove the rubber cap.
5. Carefully remove the lamp. Do not shake or rotate it while removing it.
6. Installation is carried out in the reverse order.
WARNING: Do not leave the reflector without a lamp for a long time. Dust, moisture, smoke, etc. entering the reflector may reduce its light performance.