Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if it is accidentally deployed (see Section The electric drive of forward seats - the general information and check of serviceability of functioning). SRS circuit wiring is easily identified by the yellow color of the insulation.
1. Disable SRS (see Section Airbags - general information).
2. Remove the dashboard trim panel (see chapter Body).
3. Turn out fixing screws and take a combination of devices from the landing socket.
4. Disconnect electroconducting and remove a combination of devices.
5. Installation is carried out in the reverse order.