Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or instrument panel, turn off the SRS to avoid injury if it is accidentally deployed (see Section The electric drive of forward seats - the general information and check of serviceability of functioning). SRS circuit wiring is easily identified by the yellow color of the insulation.
Radio/CD player
1. Disable SRS (see Section Airbags - general information).
2. Remove facing of the central section of the panel of devices and the plastic panel directly under an ashtray (see chapter Body).
3. Remove the fixing screws and remove the radio receiver assembly with the heater operation control panel from its seat in the instrument panel, disconnect the electrical wiring and antenna cable from the assembly.
4. Disconnect the antenna cable and connecting wiring, then remove the screws from the two side support brackets and separate the radio/CD player from the heater control panel assembly.
5. Installation is carried out in the reverse order.
Loudspeakers
Door loudspeakers
1. Remove the front door upholstery panel (see chapter Body).
2. Turn out fixing screws, take assemblage of a loudspeaker from the landing nest and disunite a socket of electroconducting.
3. Installation is carried out in the reverse order.
Rear speakers
1. Remove the rear shelf (see chapter Body).
2. Turn over the rear shelf, remove the fixing screws and remove the loudspeaker.
3. Installation is carried out in the reverse order.