1. Loosen the clamp on the intake air duct and disconnect the air duct.
2. Release the air cleaner cover retaining clips.
3. Unscrew the cover, remove it and take out the element.
Removing and installing the air filter element for the SR20DE engine.
Removing and installing the air filter element for the SR20Di engine.
4. Use a clean cloth to wipe the inside of the filter housing, then install the new element. If the element has a "TOP" mark, be sure to install it with this side facing up.
5. Replace the lid and close the clamps.
6. Connect the air duct and tighten the clamp screw.