Table of contents: Removal ↓ Installation ↓
Removal
1. Remove the air duct. See section "Removal".
2. Remove the clamps (2) from the air cleaner housing (1).
3. Slide the air cleaner housing downwards and remove it by pulling it forward.
After squeezing the upper radiator hose, remove the air cleaner housing (1).
4. Remove the filter element from the air cleaner housing.
Note: In some cases, the filter element may remain in the upper housing of the air cleaner.
Installation
1. Install the filter element into the upper housing of the air cleaner (1).
2. Insert the two tabs (3) on the air cleaner body (2) into the two notches (4) on the rear of the upper air cleaner body (1), then lift up and secure with the clamp.
3. Install the air duct.