Engine Coolant — Check (HR) Level check All models, except models with manual gearbox with air conditioning Make sure the coolant level in the reservoir is between the marks «MIN» And «MAX», when...
Engine Coolant Change (HR) Attention: To avoid burns, do not change the coolant when the engine is hot. Wrap the lid with a thick cloth and carefully remove the lid. First loosen the cap a quarter...
Disassembly and assembly of the cooling fan (HR) 1. Fan cover; 2. Fan motor; 3. Fan 1. Resistor; 2. Fan cover; 3. Fan motor; 4. Fan Disassembly 1. Remove the fan. Attention: The return screw is used to fix the fan....
Water pump — removal and installation (HR) Removing 1. Drain the coolant. Caution: Do not remove the radiator cap when the engine is hot. High-pressure coolant splashing out of the radiator can cause severe...
Thermostat — removal and installation (HR) 1. Radiator hose (lower); 2. Inlet pipe; 3. Rubber ring; 4. Thermostat; A. To the radiator Removing 1. Drain the coolant. Attention: Do not remove the radiator cap when...
Outlet pipe — removal and installation (HR) 1. Engine coolant temperature sensor; 2. Washer; 3. Gasket; 4. Radiator hose (upper); 5. Outlet pipe; 6. Heater hose; 7. Heater hose; 8. Water hose; 9. Water hose; A. To...