When removing parts using a screwdriver or other tool, protect the parts by wrapping the end of the tool with electrical or vinyl tape.
Cover the removed parts with a clean cloth.
If the clamps are deformed or damaged, replace them with new ones.
Replace disposable parts with new ones after each removal.
Tighten bolts and nuts securely to the specified tightening torques.
After completing the assembly, make sure that each part is in working order.
The article was copied from here www.nissanbook.ru
Remove paint in the following manner:
- A) Water-soluble paints: dip the fabric in warm water and squeeze it out well; after removing paint, wipe the surface with a soft dry cloth.
- B) Oil paints: dilute synthetic detergent in warm water (two or three percent solution); dip the cloth into the solution and then remove the paint, After that dip the soft cloth into fresh water and then squeeze it well. After that remove the detergent completely. Wipe the surface with a soft dry cloth.
Do not use organic solvents or gasoline.
When performing procedures that require removing the hood, cover the lower edge of the windshield with a suitable material.
