Front oil seal
1. Remove the gearbox (see below).
2. Remove the release bearing and unscrew the front cover bolts (photo) and remove the cover.
2.3 Removing the front oil seal.
3. Pry and remove the seal from the cover (photo).
4. Lubricate and press in the new seal using a mandrel. Further assembly is performed in the reverse order.
Rear oil seal
5. Remove the driveshaft.
B. Disconnect the throttle linkage inside the passenger compartment.
7. Use a screwdriver to pry up and remove the seal (photo).
2.7 Removing the rear oil seal.
8. Lubricate and press in the new seal using a mandrel. Install the cardan shaft.