1 - screws; 2 - drummer; 3 - door pillar
2. Remove the set screws and remove the striker plate. Check the condition of the parts, replace the defective ones.
3. Installation is carried out in the reverse order.
4. Place the striker plate on the strut in accordance with the landing marks made during the dismantling process. Screw in the set screws and tighten just enough to hold the plate in place.
5. Close the door, then close it tightly.
6. Raise the outside handle and carefully open the door, being careful not to dislodge the striker plate.
7. Tighten the screws and close the door again, checking that the lock and striker plate function properly. If further adjustment is necessary, loosen the set screws and move the striker plate in the desired direction to ensure that the lock will operate correctly when opening and closing the door.
8. After completing the adjustment, firmly tighten the plate set screws.