Table of contents: Front door speaker ↓ Speaker in the footwell ↓ Rear speaker (sedan) ↓ Rear speaker (hatchback) ↓
Front door speaker
1. Remove the door panel.
2. Unscrew the screws (indicated by arrows) and remove the speaker from the case, disconnect the connector.
3. If necessary, remove the speaker from the housing by unscrewing the 4 screws.
4. Install the speaker in reverse order.
Speaker in the footwell
5. Disconnect the battery from ground.
6. Open the door and remove the front pillar seal.
7. Carefully pry up and remove the rack trim.
8. Loosen the screws securing the speaker to the stand, lift the speaker and disconnect the connectors.
9. Install the speaker in reverse order.
Rear speaker (sedan)
10. Disconnect the battery from ground.
11. Remove the rear shelf tray.
12. Remove the four screws and remove the speaker from the body panel. Disconnect the connector and remove the wires from the brackets.
13. Install the speaker in reverse order.
Rear speaker (hatchback)
14. Disconnect the battery from ground.
15. Remove the four screws on the side panel/shelf and remove the speaker from the bracket, disconnect the connector.
16. Install the speaker in reverse order.