Tank
1. Turn the bottle neck clockwise and remove.
2. Disconnect the battery from the ground.
3. Raise the front of the car.
4. Remove the protective wing panel.
5. Disconnect the connectors from the tank.
6. Disconnect the hoses from the tank.
7. Remove the wiring from the brackets and take it aside.
8. Loosen the screws and remove the tank through the wheel well.
9. Install the tank in reverse order.
Tank and pump
10. Follow the steps in paragraphs. 2–4.
11. Disconnect the hose and connector from the pump.
12. Remove the pump.
13. Install the pump in reverse order.
Windshield nozzle
14. Open the hood.
15. Bend the latches and remove the nozzle.
16. Install the nozzle in reverse order.
Rear window nozzle (hatchback)
17. The nozzle is built into the brush arm. Loosen the screw, disconnect the hose and remove the nozzle.
18. Install the nozzle in reverse order.