Front wipers
Push the wiper arm down to turn on.
To turn off, move the lever to the OFF position.
To adjust the time interval in intermittent mode, turn the tip of the switch lever.
Windshield washer
If you pull the switch lever towards you, the windshield will be washed with liquid, after which the wiper brushes will make several passes.
Attention:
If no fluid flows when the washer is turned on, do not keep the washer on for more than 30 seconds, because. pump motor may burn out.
If the windshield is dry, turn on the cleaner only after washing, because. otherwise, the glass may be scratched or the rubber of the brush may deteriorate.
If snow has accumulated on the windshield and the blades do not move, remove the snow manually.
Rear window cleaner
If you align the dot on the switch with the inscriptions on the lever, the wiper will work as follows:
Cleaner without regulator in intermittent mode:
Intermittent Regulator Cleaner:
Washer fluid supply
Fluid flows while the switch is held in the WASH position.
In WASH position (1) liquid is supplied, and the wiper makes several passes.
In WASH position (2) liquid is supplied during the operation of the wiper.