Table of contents: Heating ↓ Ventilation ↓ Eliminating fogging or icing of glass ↓ Two-level heating ↓ Windshield heating and defogging ↓ Features of operation ↓
Heating
In this mode, heated air passes through nozzles located in the floor of the body.
1. During normal heating, air recirculation should be turned off.
2. Turn the air flow control knob to the " position
".
3. Turn on the fan.
4. Set the temperature control knob between the middle and the far right position, according to your choice.
For quick heating, turn on the air recirculation mode. After the interior has warmed up, turn off this mode.
Ventilation
In this mode, heated air passes through the central and side fan nozzles.
1. Turn off air recirculation.
2. Turn the air flow control knob to the " position
".
3. Turn on the fan.
4. Use the temperature control knob to set the desired air flow temperature.
Eliminating fogging or icing of glass
This mode is used against fogging or icing of the glass.
1. Turn off the air recirculation mode.
2. Turn the air flow control knob to the position
.
3. Turn on the fan.
4. Set the temperature control knob between the middle and the far right position, according to your choice.
To quickly remove ice or fog from the windows, turn on the air recirculation mode and set the fan knob to position "4" and the temperature control knob to the far right position (maximum heating). Immediately after the glass is clean, the air recirculation mode should be turned off.
Two-level heating
In this mode, outside air comes from the side and central openings of the fan, and heated air comes from the openings in the floor of the body.
1. Turn off air recirculation.
2. Turn the air flow control knob to the " position
".
The material is based on data from the portal: www.NissanBook.ru
3. Turn on the fan.
4. Set the temperature control knob to the middle position.
Windshield heating and defogging
In this mode, the interior and windshield are heated.
1. Turn off the air recirculation mode.
2. Turn the air flow control knob to the " position
".
3. Turn on the fan.
4. Set the temperature control knob between the middle and the far right position, according to your choice.
Features of operation
To maintain proper operation of the heater, clear snow and ice from the windshield wiper blades and from the air intake vents located outside in front of the windshield.